Movable partition wall installation after sales problems

The good space effect of the high partition wall depends on the structural characteristics of the profile, and half depends on the installation technique of the high partition wall. The partition wall of the finished product is generally cut off at the factory according to the site size, and is punched and processed; the aluminum of the finished partition wall is not installed, which requires the skilled workers to be very skilled in the installation of the partition wall.

The installation of the high partition wall is generally the material of each floor after the material arrives at the site, and then the upper and lower slots, the wall slots, the inner frame material, the outer frame material such as the substrate panel are installed in sequence. The installation of the partition wall is actually not complicated, but to achieve a good partition wall effect, the excellent quality and the objective installation square is difficult for the general master to do. The installation process will encounter the on-site wall skew, the horizontal level is uneven, the ceiling can not be constructed, etc. All kinds of problems require the master to have a certain ability to analyze and solve the problem on the spot. If the solution is not good, it will bring many big problems after the sale of the high partition wall.

The general problem after the sale is mainly for the loosening or disjointing of the louver knob, the door can not be closed or the lock is broken and other frequently moving parts are repaired. Therefore, the high partition wall installation master requires strict installation of the frequently used components during the installation of the compartment. The wire rope of the louver knob must be fixed in place with the inner hexagon, and it should not be too tight or loose, otherwise it is easy to break or The door can not be used in the later stage. The door must be installed horizontally and the hinge must be fixed. In particular, the glass of the glass door will slide down when it is not in use. It is neither beautiful nor unsafe.

The installation master of the partition wall must have good quality, and the work must be based on conscience, otherwise it will bring great problems to the maintenance of the later glass partition wall.