Fireproof Heat insulation partition wall board

As the name suggests, the ultra-high-type decorative patition wall is used in general large banquet halls or conference centers. The height of the ceiling is relatively high, usually as high as 8 meters or even 12 meters, and it will reach a height of 15 meters. This ultra-high type movable partition wall is selected for the use of the so-called multi-functional hall.

In such a high place, the door panel will be much heavier than the door panel of the general movable partition, which means that the partition used is completely hung on the steel structure, and the structure of the ceiling needs to bear the weight of tons or even more than ten tons. The material selection and installation requirements for the steel frame are very high.

Generally, the structure of the house is more complex, the conventional concrete steel structure, tennis steel structure or simple structure, etc., for different

For the housing structure, professional designers need to investigate the site and then make a professional steel frame installation plan. With our many years of experience, we will definitely work out the most suitable installation solution for you.

In order to avoid the result of failure after installing the steel frame, it is necessary to focus on the span of the steel frame when formulating the plan, and the specification of the steel to measure the load-bearing value. These factors are indispensable, otherwise, the installation of the steel frame will fail.

Product features of ultra-high decorative patition wall :

1. There is no need to install rails on the ground. The partition door panels are connected to the hanging installation rails on the ceiling. The door panels rely on the ceiling rails to push and use without noise. When you need to use it, press down the bead, and the movable partition wall can be installed soon.

2. The door panel is equipped with a retractable structure up and down.

3. After the large space is divided into small spaces, the thermal insulation performance and Sound Insulation effect will be more significant.

4. They are all made of high-efficiency flame-retardant fire-resistant materials, which have good fire-proof performance and can immediately block the re-burning of the fire source. The safety factor is high, the product data meets the national standards, and the materials are environmentally friendly, energy-saving and renewable.

5. The exterior of the partition door panel can be arbitrarily designed with decorative surfaces according to the needs of customers and the style of the venue.